What should I be careful of when using the heaven and earth cover molding machine?

1. When forming and folding into the unit to close the box body, the four corners of the box must be tight and seamless, the four corners and the top should be flush, too close to the inside or outside will bring trouble to the mounting paper, and the adhesive is not dry. It is forbidden to transfer to the next process. The parallelism of the belt of the heaven and earth cover molding machine should be adjusted frequently. One tight and one loose will lead to the deformation of the belt. For a long time, the production of the book box is not correct, thus prematurely scrapping the belt. The nozzle of the heaven and earth cover molding machine is maintained. If the nozzle is not used for a long time, it should be opened once a week, open the air pressure, manually open the nozzle, and spray a little glue, otherwise it is easy to lead to the nozzle will be blocked if it is not used for a long time.

2. When mounting the face paper, it must be wiped with flannelette to make it strong, and achieve surface lubrication without bubbles and glue stains. The nozzle of the heaven and earth cover molding machine is maintained. If the nozzle is not used for a long time, it should be opened once a week, open the air pressure, manually open the nozzle, and spray a little glue, otherwise it is easy to lead to the nozzle will be blocked if it is not used for a long time.

3. When scraping with a scraper, the four sides must be scraped in place to avoid the four corner interface warping or showing wrinkles.

4. Adhere to clean hands, clean operation console, avoid dirty operation control sticky box lining paper. Only if these reasons are found, there will be few problems when we use the Liuhe cover machine!

Ruian Fengxing Machinery Co., Ltd. specializes in the production of heaven and earth cover molding machine, more related products please pay attention to the official website www.rxzkjx.com